=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Fixup

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

PROGRAM FIXUP = &nb= sp; = &nb= sp; Fixup

VERSION 84= -1 (NOVEMBER 1984) = &nb= sp; = Fixup

VERSION 86= -1 (JANUARY 1986) *IMPROVED BASED ON USER COMMENTS Fixu= p

= &nb= sp; *FORTRAN-77/H VERSION = Fixup

VERSION 86= -2 (JUNE 1986) *ALLOW CREA= TION OF SECTIONS OF CROSS Fixup

= &nb= sp; = SECTIONS WHICH ARE NOT PRESENT IN Fixup

= &nb= sp; = THE ORIGINAL EVALUATION = Fixup

VERSION 88= -1 (JULY 1988) *OPTION...INTERNALLY DEFINE ALL I/O Fixup

= &nb= sp; = FILE NAMES (SEE, SUBROUTINE FILEIO Fixup

= &nb= sp; = FOR DETAILS). = &nb= sp; Fixup

= &nb= sp; *IMPROVED BASED ON USER COMMENTS. Fixup

VERSION 89= -1 (JANUARY 1989) *PSYCHOANALYZED BY PROGRAM FREUD TO Fixup

= &nb= sp; = INSURE PROGRAM WILL NOT DO ANYTHING Fixup

= &nb= sp; = CRAZY. = &nb= sp; Fixup

= &nb= sp; *UPDATED TO USE NEW PROGRAM CONVERT Fixup

= &nb= sp; = KEYWORDS. = &nb= sp; Fixup

= &nb= sp; *ADDED LIVERMORE CIVIC COMPILER Fixup

= &nb= sp; = CONVENTIONS. = &nb= sp; Fixup

VERSION 89= -2 (MARCH 1989) *ADDED END= F/B-VI SUMMATION RULES AND Fix= up

= &nb= sp; = DEFINED MF AND MT NUMBERS. PROGRAM Fixup

= &nb= sp; = WILL NOW USE MF=3D1, MT=3D451 TO DEFINE Fixup

= &nb= sp; = THE ENDF/B FORMAT OF THE DATA (E.G., Fixup

= &nb= sp; = ENDF/B-VI OR EARLIER) AND USE THE Fixup

= &nb= sp; = CORRECT SUMMATION RULES FOR EACH Fixup

= &nb= sp; = VERSION OF THE ENDF/B FORMAT. IF Fixup

= &nb= sp; = MF=3D1, MT=3D451 IS NOT PRESENT PROGRAM Fixup

= &nb= sp; WILL USE ENDF/B-VI SUMMATION = Fixup

= &nb= sp; = CONVENTIONS AS A DEFAULT. = Fixup

VERSION 90= -1 (JUNE 1990) *UPDA= TED BASED ON USER COMMENTS Fixup

= = *ADDED PHOTON INTERACTION, MF=3D23 Fixu= p

VERSION 91= -1 (JUNE 1991) *ADDED FORTRAN SAVE OPTION = Fixup

= &nb= sp; *NEW MORE CONSISTENT ENERGY OUTPUT Fixup

= &nb= sp; ROUTINE = &nb= sp; Fixup

VERSION 92= -1 (JANUARY 1992) *ADDED OPTION TO CALCULATE RATIOS, Fixup

= &nb= sp; = E.G., CAPTURE/FISSION AND PRODUCTS, Fixup

= &nb= sp; = NU-BAR*FISSION - AND OUTPUT THE Fixu= p

= &nb= sp; = RESULTS IN THE ENDF/B FORMAT (SEE, Fixup

= &nb= sp; = BELOW - CREATING RATIOS AND PRODUCTS) Fixup

= &nb= sp; *ALLOW TOTAL NU-BAR (MF=3D1, MT=3D452) TO Fixup

= &nb= sp; = BE USED IN DEFINING RATIOS OR Fixup

= &nb= sp; = PRODUCTS. = &nb= sp; Fixup

= &nb= sp; *ALLOW ALL CROSS SECTIONS TO BE PUT Fixup

= &nb= sp; = ON A UNIFORM ENERGY GRID. = Fixup

= &nb= sp; *NOTE, CHANGE IN INPUT FORMAT FOR Fixup

= &nb= sp; = RANGES OF MT NUMBERS = Fixup

= &nb= sp; *COMPLETELY CONSISTENT I/O ROUTINES - Fixup

= &nb= sp; = TO MINIMIZE COMPUTER DEPENDENCE. Fixup

VERSION 93= -1 (JULY 1993) *CORR= ECTED ALGORITHM TO CREATE UNIFORM Fixup &nb= sp;

= &nb= sp; = ENERGY GRID. = &nb= sp; Fixup

VERSION 94= -1 (JANUARY 1993) *VARIABLE ENDF/B DATA FILENAMES Fixup

= &nb= sp; = TO ALLOW ACCESS TO FILE STRUCTURES Fixup

= &nb= sp; (WARNING - INPUT PARAMETER FORMAT = Fixup

= &nb= sp; = HAS BEEN CHANGED) = Fixup

= &nb= sp; *INCREASED PAGE SIZE FROM 1002 TO Fixup

= = 12= 000 DATA POINTS. = Fixup

= &nb= sp; *CLOSE ALL FILES BEFORE TERMINATING Fixup

= &nb= sp; = (SEE, SUBROUTINE ENDIT) = Fixup

VERSION 96= -1 (JANUARY 1996) *COMPLETE RE-WRITE = Fixup

= &nb= sp; *IMPROVED COMPUTER INDE= PENDENCE Fixup

= &nb= sp; *ALL DOUBLE PRECISION = Fixup

= &nb= sp; *ON SCREEN OUTPUT = &nb= sp; Fixup

= &nb= sp; *UNIFORM TREATMENT OF ENDF/B I/O Fixu= p

= &nb= sp; *IMPROVED OUTPUT PRECISION = Fixup

= &nb= sp; *DEFINED SCRATCH FILE NAMES = Fixup

= &nb= sp; *INCREASED PAGE SIZE FROM 12000 TO Fixup

= &nb= sp; = 36000 DATA POINTS. = Fixup

VERSION 99= -1 (MARCH 1999) *CORRECTED CHARACTER TO FLOATING Fixu= p

= &nb= sp; = POINT READ FOR MORE DIGITS = Fixup

= &nb= sp; *UPDATED TEST FOR ENDF/B FORMAT Fixup

= &nb= sp; = VERSION BASED ON RECENT FORMAT CHANGE Fixup

= &nb= sp; *GENERAL IMPROVEMENTS BASED ON Fixup

= &nb= sp; = USER FEEDBACK = &nb= sp; Fixup

VERSION 99= -2 (JUNE 1999) *ASSU= ME ENDF/B-VI, NOT V, IF MISSING Fixup

= &nb= sp; = MF=3D1, MT-451. = &nb= sp; Fixup

= &nb= sp; *FIXED CREATION OF SECTIONS = Fixup

VERS. 2000= -1 (FEBRUARY 2000)*GENERAL IMPROVEMENTS BASED ON Fixup

= &nb= sp; USER FEEDBACK = &nb= sp; Fixup

VERS. 2002= -1 (MAY 2002) *OPTIONAL INPUT PARAMETERS = Fixup

= &nb= sp; *SUMMATION RULES ARE DEFINED BASED Fixup

= = &nb= sp;ON CONTENTS OF TABLES. = Fixup

VERS. 2004= -1 (JAN. 2004) *GENE= RAL UPDATE BASED ON USER FEEDBACK Fixup &= nbsp;

= &nb= sp; *INCREASED PAGE SIZE FROM 36000 TO Fixup

= &nb= sp; = 60000 DATA POINTS. = Fixup

VERS. 2005= -1 (JAN. 2005) *UPDA= TED MT CREATION TO ALLOW MAT =3D0 Fixup

= &nb= sp; = INDICATING CREATE FOR ALL MATS. Fixu= p

VERS. 2007= -1 (JAN. 2007) *CHEC= KED AGAINST ALL ENDF/B-VII Fixup

= &nb= sp; *INCREASED PAGE SIZE FROM 60,000 TO Fixup

= &nb= sp; = 600,000 DATA POINTS. = Fixup

= &nb= sp; = = &nb= sp; Fixup

OWNED, MAINTAINED AND DISTRIBUTED BY = &nb= sp; Fixup

------------------------------------ = &nb= sp; Fixup

THE NUCLEA= R DATA SECTION = &nb= sp; = Fi= xup

INTERNATIO= NAL ATOMIC ENERGY AGENCY = &nb= sp; Fixup

P.O. BOX 100 = &nb= sp; = &nb= sp; Fixup

A-1400, VI= ENNA, AUSTRIA = &nb= sp; = = Fixup

EUROPE = &nb= sp; = &nb= sp; = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

ORIGINALLY WRITTEN BY = &nb= sp; = Fixup

------------------------------------ = &nb= sp; Fixup

DERMOTT E. CULLEN = &nb= sp; = &nb= sp; Fixup

UNIVERSITY= OF CALIFORNIA = &nb= sp; = Fixup

LAWRENCE LIVERMORE NATIONAL LABORATORY = &nb= sp; Fixup

L-159 = &nb= sp; = &nb= sp; = Fixup

P.O. BOX 808 = &nb= sp; = &nb= sp; Fixup

LIVERMORE,= CA 94550 = &nb= sp; = &nb= sp; Fixup

U.S.A. = &nb= sp; = &nb= sp; = Fixup

TELEPHONE<= span style=3D'mso-spacerun:yes'> 925-423-7359 = &nb= sp; = Fixup

E. MAIL CULLEN1@LLNL.GOV = &nb= sp; = Fixup

WEBSITE HTTP://WWW.LLNL.GOV/CULLEN1 = &nb= sp; Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

PURPOSE = = &nb= sp; = Fixup

=3D=3D=3D= =3D=3D=3D=3D = &nb= sp; = &nb= sp; = Fixup

THIS PROGR= AM IS DESIGNED TO READ EVALUATED DATA IN THE ENDF/B Fixup

FORMAT, PE= RFORM CORRECTIONS AND OUTPUT THE RESULT IN THE ENDF/B Fixup

FORMAT. TWO TYPES OF CORRECTIONS ARE POSSIBLE (1) AUTOMATIC AND Fixup

(2) OPTION= AL (BASED ON USER INPUT) CORRECTIONS. = Fixup

= &nb= sp; = &nb= sp; = &nb= sp;Fixup

ONE OF THE= MOST IMPORTANT FUNCTIONS OF THIS PROGRAM IS TO = Fixup

RE-DEFINE = ALL REDUNDANT CROSS SECTIONS (E.G. TOTAL) TO BE EXACTLY Fixup

EQUAL TO T= HE SUM OF ITS PARTS. THIS PROCEDURE ELIMINATES THE Fixu= p

PROBLEM WI= TH MANY ENDF/B EVALUATIONS, WHERE DUE TO THE USE OF Fixup

NON-LINEAR INTERPOLATION LAWS THE TOTAL MAY BE EQUAL TO THE SUM Fixup

OF ITS PAR= TS AT ALL TABULATED ENERGIES, BUT BASED ON THE = Fixup

INTERPOLAT= ION LAWS IT CAN BE QUITE DIFFERENT AT ENERGIES BETWEEN Fixup

TABULATED ENERGIES. = &nb= sp; = &nb= sp; Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

AUTOMATIC CHECKS/CORRECTIONS = &nb= sp; = Fixup

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D = &nb= sp; = Fixup

(1) CHECK = THAT MAT/MF/MT DOES NOT CHANGE UNLESS A MEND/FEND/SEND Fixup

= LINE IS READ. IF MAT/MF/MT CHANGES A WARNING MESSAGE IS Fixup

= PRINTED BUT NO CORRECTIVE ACTION IS TAKEN. = Fixup

(2) ALL LI= NES WITHIN A GIVEN MAT WILL BE SEQUENTIALLY NUMBERED Fixup

= ON OUTPUT. = &nb= sp; = &nb= sp; Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

OPTIONAL CHECKS/CORRECTIONS = &nb= sp; = Fixup

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D = &nb= sp; = Fixup

THE FOLLOW= ING NUMBERS CORRESPOND TO THE INPUT DATA OPTION COLUMNS Fixup

(SEE THE DESCRIPTION OF THE INPUT BELOW) = &nb= sp; Fixup

= &nb= sp; = = &nb= sp; = Fixup

(1) CORREC= T ZA AND AWR IN ALL SECTIONS. CHECK TO INSURE THAT THE Fixup

= C1 AND C2 VALUES (ZA AND AWR) ARE THE SAME IN ALL SECTIONS. Fixup

= THE C1 AND C2 OF THE FIRST SECTION READ ARE ASSUMED TO BE Fixup

= CORRECT AND ARE USED FOR COMPARISON. IF THE C1 AND/OR C2 OF Fixup

= THE FIRST SECTION ARE NOT POSITIVE AN ERROR MESSAGE IS OUTPUT Fixup

= AND THE MATERIAL IS COPIED WITHOUT CHANGE. = Fixup

= NOTE....TO CHANGE THE ZA AND/OR AWR OF ANY MATERIAL IT IS Fixup

= MERELY NECESSARY TO CHANGE THE ZA AND/OR AWR IN THE FIRST Fixup

= SECTION OF THE MATERIAL AND USE THIS OPTION TO AUTOMATICALLY Fixup

= CHANGE ALL OTHER SECTIONS. = &nb= sp; = Fixup

(2) CORRECT CROSS SECTION (MF=3D3) THRESHOLDS. THE Q-VALUE AND AWR Fixup

= ARE USED TO DERIVE THE REACTION THRESHOLD USING THE RELATION, Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

= E-THRESHOLD =3D -(Q-VALUE)*(AWRE+1.0)/AWRE = &nb= sp; Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

IF THE THRESHOLD IS POSITIVE = THE CROSS SECTION IS CHECKED TO Fixup

= INSURE THAT THE FIRST TABULATED POINT IS AT THE THRESHOLD AND Fixup

= HAS A ZERO CROSS SECTION. IF NOT, THE CROSS SECTION WILL BE Fixup

= CHANGED. = &nb= sp; = &nb= sp; Fixup

= (A) IF THE FIRST TABULATED POINT IS ABOVE THE THRESHOLD AND Fixup

= HAS A ZERO CROSS SECTION, THE POINT IS DELETED AND A POINT Fixup

= IS INSERTED AT THE THRESHOLD. = &nb= sp; Fixup

= (B) IF THE FIRST TABULATED POINT IS ABOVE THE THRESHOLD AND Fixup

= HAS A NON-ZERO CROSS SECTION, A POINT WITH ZERO CROSS Fixup

= SECTION IS INSERTED AT THE THRESHOLD. = &nb= sp; Fixup

= (C) IF THE FIRST TABULATED POINT IS BELOW THE THRESHOLD AND Fixup

= HAS A NON-ZERO CROSS SECTION, ALL POINTS BELOW THE Fixup

= THRESHOLD ARE DELETED AND A POINT WITH ZERO CROSS SECTION Fixup

= IS INSERTED AT THE THRESHOLD. = &nb= sp; Fixup

(3) EXTEND= ALL CROSS SECTIONS (MF=3D3) TO 20 MEV. IF THE TABULATED Fixup

= CROSS SECTION ENDS BELOW 20 MEV IT WILL BE EXTENDED TO 20 MEV Fixup

= AS EITHER ZERO (IMOPS(3)=3D1) OR CONSTANT (IMOPS(3)=3D2) EQUAL Fixup

= TO THE LAST TABULATED VALUE. = &nb= sp; = Fixup

(4) ALLOW REACTION (MF=3D3, ANY MT) DELETION. ALL SPECIFIED Fixup

= REACTIONS WILL BE DELETED WHEN THE DATA IS READ FROM THE Fixu= p

= INPUT ENDF/B DATA FILE AND WILL NOT BE IN THE OUTPUT ENDF/B Fixup

= DATA FILE. WARNING DELETED REACTIONS MAY NOT BE USED TO DEFINE Fixup=

= ANY RECONSTRUCTED REACTIONS (I.E. REACTIONS DEFINED BY SUMMING Fixup

= OTHER REACTIONS). SINCE DELETED REACTIONS ARE DELETED DURING Fixup

= READING IT IS AS IF THEY NEVER EXISTED AND IF ANY DELETED Fixup

REACTION IS REQUI= RED LATER TO DEFINE ANY SUM AN ERROR WILL Fixup

= RESULT. THE USER MAY SPECIFY THAT THE DELETION RULES ARE TO BE Fixup

= READ FROM INPUT (IMOPS(4)=3D1) OR THAT THE BUILT IN SUMMATION Fixup

= RULES ARE TO BE USED (MOPS(4)=3D2). AT THE PRESENT TIME THE Fixup

= BUILT-IN DELETION RULES ARE THAT NO SECTIONS SHOULD BE DELETED Fixup

= (THE USER MAY OVERRIDE THIS CONVENTION BY INPUT). = Fixup

(5) ALLOW REACTION (MF=3D3, ANY MT) RECONSTRUCTION BY SUMMING OTHER Fixup

= REACTIONS. IN ORDER TO OPTIMIZE THE RUNNING TIME OF THIS Fixu= p

= PROGRAM CARE SHOULD BE EXERCISED TO MINIMIZE THE NUMBER OF Fixup

= TIMES THAT EACH CONTRIBUTING CROSS SECTION MUST BE USED. Fixu= p

= THE USED MAY SPECIFY THAT THE SUMMATION RULES ARE TO BE READ Fixup

= AS INPUT (IMOPS(5)=3D1) OR THAT THE BUILT IN SUMMATION RULES Fixup

= ARE TO BE USED (IMOPS(5)=3D2). THE BUILT IN SUMMATION RULES ARE Fixup

= DESIGNED TO USE ENDF/B CONVENTIONS AND TO MINIMIZE THE NUMBER Fixup

= OF TIMES THAT EACH CROSS SECTION IS USED. = &nb= sp; Fixup

(6) INSURE= THAT ALL CROSS SECTIONS ARE NON-NEGATIVE (I.E. ARE Fixup

= ZERO OR POSITIVE). DURING READING ALL NEGATIVE CROSS SECTIONS Fixup

= WILL BE SET EQUAL TO ZERO AND TREATED AS SUCH DURING ALL Fixu= p

= SUBSEQUENT SUMMATIONS AND ENDF/B OUTPUT. = Fixup

= NOTE...THIS OPTION SHOULD NEVER BE USED WITH DATA CONTAINING Fixup

= BACKGROUND CROSS SECTIONS WHICH MAY BE NEGATIVE. ONLY AFTER Fixup

= THE RESONANCE CONTRIBUTION HAS BEEN ADDED TO THE BACKGROUND Fixup

= TO DEFINE THE ACTUAL CROSS SECTION IS IT VALID TO ELIMINATE Fixup

= NEGATIVE CROSS SECTIONS. = &nb= sp; = Fixup

= NOTE...THIS OPTION MAY BE USED TO DELETE NEGATIVE ELASTIC Fixup

CROSS SECTIONS THAT MAY RESULT FROM RECONSTRUCTING CROSS Fixu= p

= SECTIONS FROM SINGLE LEVEL BREIT-WIGNER PARAMETERS. IF THE Fixup

= TOTAL CROSS SECTION IS THEN RECONSTRUCTED USING THE CORRECTED Fixup

= ELASTIC CROSS SECTION THE TOTAL WILL BE POSITIVE DUE TO THE Fixup

= CONTRIBUTIONS OF CAPTURE AND FISSION (THUS AVOIDING NUMERICAL Fixup

= INSTABILITY PROBLEMS DURING SELF-SHIELDING CALCULATIONS). Fixup

(7) WITHIN= EACH SECTION OF CROSS SECTIONS DELETE ENERGIES THAT Fixup

= ARE NOT IN ASCENDING ENERGY ORDER (ENERGY REPETITION IS O.K.) Fixup

(8) WITHIN= EACH SECTION OF CROSS SECTIONS ELIMINATE DUPLICATE Fixup

= POINTS (SUCCESSIVE POINTS WITH THE SAME ENERGY-CROSS SECTION). Fixup

(9) TEST T= HAT ALL SECTIONS ARE IN ASCENDING MAT/MF/MT ORDER. Fixu= p

= IF NOT, NO CORRECTIVE ACTION WILL BE TAKEN, ONLY AN ERROR Fixup

= MESSAGE WILL BE OUTPUT. = = &nb= sp; Fixup

<= /p>

(10) CHECK MF/MT= FOR EACH SECTION TO INSURE THAT THEY ARE DEFINED Fixup

= IN THE ENDF/B FORMAR MANUAL. IF THEY ARE NOT DEFINED AN ERROR Fixup

= MESSAGE IS PRINTED, BUT NO CORRECTIVE ACTION IS TAKEN. Fixup

(11) ALLOW SECTI= ONS WHICH ARE NOT PRESENT IN THE ORIGINAL (INPUT) Fixup

= EVALUATION TO BE CREATED. NORMALLY THIS PROGRAM WILL ONLY Fixup

= RECONSTRUCT AND OUTPUT SECTIONS IF THE SECTION IS PRESENT Fixup

= IN THE ORIGINAL EVALUATION. THIS PROCEDURE IS FOLLOWED BECAUSE Fixup

= NORMALLY THE PROGRAM DOES NOT KNOW HOW TO DEFINE THE CONTENTS Fixup

= OF THE FIRST TWO LINES OF THE SECTION (E.G., Q-VALUE, = Fixup

= TEMPERATURE, INITIAL AND FINAL STATES). THIS OPTION MAY BE Fixup

= USED TO ALLOW THE PROGRAM TO READ AND SAVE A TABLE DEFINING Fixup

= THE CONTENTS OF THE FIRST TWO LINES OF EACH SECTION TO BE Fixup

CREATED. = &nb= sp; = &nb= sp; Fixup

= NOTE...IF A SECTION IS PRESENT ANY COMMAND TO CREATE IT WILL Fixup

= BE IGNORED. = &nb= sp; = &nb= sp; Fixup

(12)ALLOW = ENERGY POINTS TO BE INSERTED. THE PROGRAM CAN READ UP Fixup

= TO 50, ENERGIES, MAT, MT AND USE LINEAR INTERPOLATION TO Fixu= p

= INSERT ENERGY POINTS INTO TABLES AS THEY ARE READ, E.G., Fixu= p

= INSERT AN ENERGY POINT AT THERMAL ENERGY (0.0253 EV). IF Fixu= p

= AN MAT AND/OR MT IS ZERO THIS IMPLIES =3D ALL - INSERT THE Fixu= p

= ENERGY IN ALL TABLES. = &nb= sp; = Fixup

(13)PUT AL= LOW CROSS SECTIONS ON A UNIFORM ENERGY GRID =3D EACH Fixu= p

= SECTION (MT) OF CROSS SECTIONS WILL INCLUDE ALL ENERGIES Fixu= p

= WHICH APPEAR IN AT LEAST ONE SECTION OF DATA. PARAMETERS Fixu= p

= (MT=3D251 THROUGH 255) ARE NOT INCLUDED IN THE UNIFORM ENERGY Fixup

= GRID. = &nb= sp; = &nb= sp; Fixup

(14)DELETE SECTION IF CROSS SECTION =3D 0 AT ALL ENERGIES. THIS Fixup

= SOUNDS LIKE AN ABSURD OPTION, BUT IS REQUIRED BECAUSE SUCH Fixup

= SECTIONS EXIST IN ENDF/B-VI. = &nb= sp; = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

CREATING R= ATIOS AND PRODUCTS = &nb= sp; = Fixup

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D = &nb= sp; = Fixup

IN ORDER TO CREATE RATIOS AND PRODUCTS =3D NEW MT NUMBERS, YOU MUST Fixup

DO TWO THINGS, = &nb= sp; = &nb= sp; Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

1) DEFINE = EACH NEW MT NUMBER AS A RATIO OR PRODUCT OF TWO MT Fixu= p

NUMBERS. = &nb= sp; = &nb= sp; Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

2) USE THE CREATE MT NUMBER OPTION AND INPUT THE FIRST TWO LINES Fixup

OF THE SECTION = &nb= sp; = &nb= sp; Fixup

= &nb= sp; = &nb= sp; = Fixup

WARNING - = UNLESS YOU DO BOTH OF THESE YOU WILL NOT OBTAIN OUTPUT Fixup

IN THE END= F/B FORMAT. = &nb= sp; = Fixup

= = &nb= sp; = &nb= sp; Fixup

TWO SPECIA= L MT NUMBERS HAVE BEEN DEFINED BY CSEWG INVOLVING Fixup

RATIOS AND PRODUCTS, = &nb= sp; = &nb= sp; Fixup

= &nb= sp; = &nb= sp; = Fi= xup

ALPHA (MT= =3D254)=3D CAPTURE (MT=3D102)/FISSION (MT=3D18) = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

ETA (MT=3D255) =3D NU-BAR (MT=3D4= 52)*FISSION (MT=3D18)/ABSORPTION (MT=3D27) Fixup =

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

ABSORPTION (MT=3D27) =3D FISSION (MT=3D18) + SUM (MT=3D102 THROUGH 116) Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

AS YET THE= RE IS NO STANDARD DEFINITION OF MT NUMBERS FOR RATIO Fixup

OR PRODUCT= DATA. YOU ARE FREE TO USE ANY MT NUMBERS NORMALLY NOT Fixup

USED IN THE ENDF/B. HOWEVER, IT WILL THEN BE YOUR RESPONSIBILITY Fixup

TO PROPERLY INTERPRET THE RESULTS, I.E., NOBODY ELSE WILL HAVE Fixup

ANY IDEA H= OW TO INTERPRET A TABLE OF DATA ASSOCIATED WITH THE MT Fixup

NUMBERS YO= U HAVE USED. = &nb= sp; = Fixu= p

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

THIS PROGR= AM CAN BE ONLY DIRECTLY DEFINE RATIOS AND PRODUCTS Fixu= p

USING TWO = MT NUMBERS =3D BINARY OPERATIONS, E.G., DEFINE THE CAPTURE Fixup

TO FISSION RATIO, OR DEFINE THE PRODUCT NU-BAR*FISSION. = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

THIS PROGR= AM CANNOT DIRECTLY DEFINE RATIO OR PRODUCT OF A SUM OF Fixup

SECTIONS T= O THE SUM OF ANOTHER SET OF SECTIONS. HOWEVER, THIS CAN Fixup

BE DONE INDIRECTLY BY FIRST DEFINING A DUMMY MT NUMBER (ANY MT Fixup

NUMBER NOT NORMALLY USED IN ENDF/B) TO BE A SUM OF SECTIONS AND Fixup

A SECOND D= UMMY MT NUMBER TO BE A SECOND SUM OF SECTIONS. YOU CAN Fixup

THEN DEFINE RATIO OR PRODUCT YOU REQUIRE TO BE THE RATIO OF THESE Fixup

TWO DUMMY = MT NUMBERS. = &nb= sp; = Fixup

= &nb= sp; = &nb= sp; = &nb= sp;Fixup

FOR EXAMPL= E, TO DEFINE ETA, = &nb= sp; = Fixup

1) FIRST D= EFINE (MT=3D27) =3D (MT=3D27) + (SUM OF MT=3D102 THROUGH 116) Fixup

2) NEXT DE= FINE (MT=3D333) =3D (MT=3D452)*(MT=3D18) = &nb= sp; Fixup

3) LAST DE= FINE (MT=3D255) =3D (MT=3D333)/(MT=3D27) = &nb= sp; Fixup

DO NOT FOR= GET TO TURN ON THE CREATE SECTION OPTION (ON THE FIRST Fixup

INPUT LINE= ) AND INPUT THE FIRST TWO LINES OF SECTION MT=3D255 - Fixup

OTHERWISE = YOU WILL NOT GET ANY ENDF/B FORMATTED OUTPUT. = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

THE ONLY S= PECIAL CONVENTIONS USED BY THIS PROGRAM IN CALCULATING Fixup

RATIOS ARE= WHEN THE DENOMINATOR OF THE RATIO IS ZERO. IN THIS Fixup

CASE IF THE NUMERATOR IS ALSO ZERO THE RATIO IS DEFINED TO BE ONE. Fixup

IN THIS CA= SE IF THE NUMERATOR IS NOT ZERO THE RATIO IS DEFINED Fixup

TO BE ZERO= . = &nb= sp; = &nb= sp; Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

ENDF/B FORMAT = &nb= sp; = &nb= sp; Fixup

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D = &nb= sp; = &nb= sp; Fixup

THIS PROGR= AM MAY BE USED WITH DATA IN ANY VERSION OF THE ENDF/B Fixup

FORMAT (I.= E. ENDF/B-I, II, III, IV, V OR VI FORMAT). SINCE A Fixu= p

PAGING SYSTEM IS USED STORE CROSS S= ECTION TABLES ON SCRATCH FILES Fixup=

THERE IS NO LIMIT TO THE SIZE OF TABLES (E.G. THE TOTAL CROSS Fixup

SECTION MA= Y BE REPRESENTED BY 200,000 TABULATED POINTS). = Fixup

= = &nb= sp; = &nb= sp; = Fixup

WARNING = &nb= sp; = &nb= sp; = Fixup

=3D=3D=3D= =3D=3D=3D=3D = &nb= sp; = &nb= sp; = Fixup

(1) FOR EA= CH SECTION OF CROSS SECTIONS (I.E. EACH MT, MF=3D3) IN Fixup

= THE ORIGINAL EVALUATION (I.E. ENDF/B DATA READ) ONE SECTION Fixup

= OF DATA WILL BE OUTPUT, UNLESS THE SECTION HAS BEEN DELETED. Fixup

= THIS INCLUDES ANY SECTIONS WHICH ARE NOT PRESENT IN THE Fixup

= ORIGINAL EVALUATION, BUT THE USER INDICATES (BY INPUT) SHOULD Fixup

= BE CREATED. = &nb= sp; = &nb= sp; Fixup

= &nb= sp; = = &nb= sp; Fixup

= THE PROGRAM WILL NOT OUTPUT ANY SECTION RECONSTRUCTED BY Fixu= p

= SUMMATION UNLESS THE CORRESPONDING SECTION (MT NUMBER) IS Fixup

= PRESENT IN THE ORIGINAL EVALUATION OR USER INPUT INDICATES Fixup

= SHOULD BE CREATED AND OUTPUT. THIS IS (A) BECAUSE THE = Fixup

= PROGRAM CANNOT DEFINE THE PARAMETERS TO APPEAR ON THE FIRST Fixup

= TWO LINES OF THE SECTION, (B) TO AVOID OUTPUTTING TOO MUCH Fixup

= DATA WHICH THE USER MAY NOT BE INTERESTED IN. = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

(2) FOR ANY SECTIONS THAT DO NOT APPEAR IN THE ORIGINAL DATA THE Fixup

= USER MAY SPECIFY THAT THEY BE DEFINED BY SUMMATION. ANY SUCH Fixup

= SECTION MAY BE USED BE DEFINE SUBSEQUENT SUMS, BUT THE SECTION Fixup

= ITSELF WILL NOT BE OUTPUT (E.G. GENERALLY MT=3D27 AND 101 ARE Fixup

NOT PRESENT IN EVALUATIONS. HOWEVER, THE BUILT-IN SUMMATION Fixup

= RULES OF THIS PROGRAM USES THE ENDF/B SUMMATION RULES TO Fixu= p

= DEFINE MT=3D27 AND 101, WHICH IN TURN ARE USED TO DEFINE THE Fixup

= NON-ELASTIC CROSS SECTION, MT=3D3. SECTIONS MT=3D27 AND 101 ARE Fixup

= NOT OUTPUT). = &nb= sp; = &nb= sp; Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

(3) ALL DA= TA IN FILE 3 AND 23 MUST BE LINEARLY INTERPOLABLE. IF Fixup

= THE DATA IS NOT LINEARLY INTERPOLABLE THIS PROGRAM WILL Fixup

= TERMINATE. = &nb= sp; = &nb= sp; Fixup

= &nb= sp; = &nb= sp; = Fixup

PROGRAM OPERATION = &nb= sp; = &nb= sp; Fixup

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D = &nb= sp; = &nb= sp; Fixup

ALL MAT NU= MBER ON AN ENDF/B TAPE ARE PROCESSED. EACH MAT IS Fixup

TREATED SEPARATELY. WITHIN EACH MAT, EACH SECTION BEFORE MF=3D3 Fixup

IS READ, CHECKED/CORRECTED (BASED ON INPUT OPTIONS) AND OUTPUT. Fixup

WHEN MF=3D= 3 IS LOCATED ALL CROSS SECTIONS ARE READ, SECTIONS TO BE Fixup

DELETED ARE DELETED, SECTIONS WHICH ARE NOT PRESENTED AND USER Fixup

INPUT INDI= CATES SHOULD BE CREATED ARE CREATE, SECTIONS TO BE KEPT Fixup

ARE CHECKED/CORRECTED (BASED ON INPUT OPTIONS) AND WRITTEN TO A Fixup

SCRATCH FI= LE. NEXT, IF THE USER SPECIFIES THAT THEY SHOULD, Fixup

SECTIONS A= RE RECONSTRUCTED. FINALLY ALL CROSS SECTIONS (OLD AND Fixup

NEW) ARE O= UTPUT. WITHIN THE SAME MAT, EACH SECTION AFTER MF=3D3 IS Fixup

READ, CHECKED/CORRECTED (BASED ON INPUT OPTIONS) AND OUTPUT. Fixu= p

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

MF=3D3 = &nb= sp; = &nb= sp; = Fixup

=3D=3D=3D=3D = &nb= sp; = &nb= sp; = Fixup

THE TREATM= ENT OF THE CROSS SECTIONS REQUIRES UP TO 4 PASSES FOR Fixup

CROSS SECT= IONS. IN THE PROGRAM THEY CORRESPOND TO SUBROUTINES Fixup

PASS1, PAS= S2, PASS3 AND PASS4. THE ORIGINAL AND FINAL ENDF/B DATA Fixup

FILES, 5 S= CRATCH FILES AND 3 IN CORE ARRAYS ARE USED. OPERATIONS Fixup

PERFORMED = DURING EACH PASS ARE, = &nb= sp; = Fixup

= = &nb= sp; = &nb= sp; Fixup

PASS1 = &nb= sp; = &nb= sp; = Fixup

=3D=3D=3D= =3D=3D = &nb= sp; = &nb= sp; = Fixup

READ ALL C= ROSS SECTIONS FROM ITAPE. DELETED ANY SECTIONS. CREATE Fixup

ANY SECTIO= NS. CHECK/CORRECT THEM AND WRITE THEM TO SCRATCH FILE. Fixup

DATA IS RE= AD INTO ARRAY A, TRANSFERRED TO ARRAY C (AFTER EDITING) Fixup

AND OUTPUT= TO ISCRC FROM ARRAY C. = &nb= sp; Fixup

ITAPE - UNIT ORIGINAL ENDF/B DATA IS READ FROM. = Fixup

ISCRC - SCRATCH UNIT THAT EDITED DATA IS WRITTEN ON. = Fixup

TABA - ARRAY INTO WHICH ORIGINAL = DATA IS READ. = Fixup

TABC - ARRAY INTO WHICH EDITED DA= TA IS TRANSFERRED TO AND Fixup

= FROM WHICH IT IS WRITTEN TO ISCRC. = &nb= sp; Fixup

= &nb= sp; = &nb= sp; = = Fixup

PASS2 = &nb= sp; = &nb= sp; = Fixup

=3D=3D=3D= =3D=3D = &nb= sp; = &nb= sp; = Fixup

IF A UNIFO= RM ENERGY GRID IS REQUESTED IT IS CREATED DURING THIS Fixup

PASS. FIRS= T ALL OF THE CROSS SECTIONS FROM PASS1 ARE READ AND A Fixup

UNIFORM EN= ERGY GRID IS CREATED =3D ALL ENERGIES THAT ARE INCLUDED Fixup

IN AT LEAS= T ONE SECTION (MT) OF CROSS SECTIONS. = Fixup

ISCRA - SCRATCH UNIT CONTAINING UNIFORM = ENERGY GRID. = Fixup

ISCRB - SCRATCH UNIT CONTAINING UNIFORM = ENERGY GRID. = Fixup

ISCRC - SCRATCH UNIT THAT EDITED DATA IS= READ FROM. = Fixup

TABA - ARRAY CONTAINING UNIFORM E= NERGY GRID. = Fixup

TABB - ARRAY CONTAINING UNIFORM E= NERGY GRID. = Fixup

TABC - ARRAY CONTAINING EDITED DATA. = &nb= sp; Fixup

= = &nb= sp; = &nb= sp; Fixup

THE UNIFORM ENERGY GRID ENDS UP ON ISCRB. NEXT EACH SECTION OF Fixup

CROSS SECT= IONS FROM PASS1 IS READ FROM ISCRC, INTERPOLATED TO Fixup

THE UNIFORM ENERGY GRID AND OUTPUT TO ISCRA. FINALLY ISCRA AND Fixup

ISCRC ARE SWITCH, SO THAT AT THE END OF THIS PASS THE DATA WILL Fixup

AGAIN BE ON ISCRC (EXACTLY AS AT THE END OF PASS1), WITH UPDATED Fixup

POINT COUNTS. = = &nb= sp; = Fixup

ISCRA - SCRATCH UNIT THAT UNIFORM ENERGY= GRID DATA IS WRITTEN ON. Fixup

ISCRB - SCRATCH UNIT CONTAINING UNIFORM = ENERGY GRID. = Fixup

ISCRC - SCRATCH UNIT THAT EDITED DATA IS= READ FROM. = Fixup

TABA - ARRAY CONTAINING UNIFORM E= NERGY GRID DATA. = Fixup

TABB - ARRAY CONTAINING UNIFORM E= NERGY GRID. = Fixup

TABC - ARRAY CONTAINING EDITED DATA. = = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

PASS3 = &nb= sp; = &nb= sp; = Fixup

=3D=3D=3D= =3D=3D = &nb= sp; = &nb= sp; Fixu= p

SUMMATION = CROSS SECTIONS ARE DEFINED BY READING DATA FROM ISCRC Fixup

AND MERGIN= G THEM ONTO ISCRA. THE FIRST SECTION THAT CONTRIBUTES Fixup

TO A SUM IS MERELY COPIED FROM C TO A. IF MORE SECTIONS WILL Fixu= p

CONTRIBUTE= TO THE SUM THE DATA IN A IS TRANSFERRED TO B, A Fixup

SECTION OF= DATA FROM C IS ADDED TO THE DATA IN B AND STORED IN Fixup

A. THE CYL= E OF ADDED C AND B TO A, FOLLOWED BY MOVING A TO B Fixu= p

IS CONTINU= ED UNTIL ALL CONTRIBUTING SECTIONS HAVE BEEN ADDED. Fixup

THE SUM IS= THEN COPIED FROM A TO D. IF NEWLY CONSTRUCTED SECTION Fixup

IS REQUIRE= D FOR ANY LATER SUMMUATIONS IT IS ALSO COPIED TO E. Fixup

THE CYCLE = OF ADDED SECTIONS FROM C AND B TO A IS REPEATED FOR Fixup

EACH REQUI= RED SUMMATION REACTION. IN ADDITION TO SECTIONS FROM Fixup

C, AFTER T= HE FIRST SUMMATION SECTIONS MAY ALSO BE ADDED TO A Fixu= p

FROM E (THE CONTRIBUTION OF NEW RECONSTRUCTED CROSS SECTIONS). Fixup

WHEN ALL REQUIRED SECTIONS HAVE BEEN RECONSTRUCTED THE NEW Fixup

SECTIONS W= ILL BE ON E AND THE ORIGINAL SECTIONS ON C. = Fixup

ISCRC - SCRATCH FILE FROM WHICH ORIGINAL= DATA IS READ. = Fixup

ISCRA - SCRATCH FILE ONTO WHICH SUM FOR = ONE SECTION IS WRITTEN. Fix= up

ISCRD - SCRATCH FILE ONTO WHICH ALL SUM = CROSS SECTIONS ARE Fixup

= WRITTEN. = &nb= sp; = &nb= sp; Fixup

ISCRE - SCRATCH FILE ONTO WHICH ALL SUM = CROSS SECTIONS WHICH &nbs= p; Fixup

= ARE REQUIRED FOR LATER SUMS ARE WRITTEN. = Fixup

ISCRB - UTILITY SCRATCH FILE USED TO CRE= ATE SUM CROSS SECTIONS. Fixup

TABA - ARRAY INTO WHICH SUMS ARE WRITTEN. = &nb= sp; Fixup

TABB - ARRAY INTO WHICH PARTIAL S= UMS ARE WRITTEN. = Fixup

TABC - ARRAY INTO WHICH ORIGINAL = DATA IS READ. = Fixup=

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

PASS4 = &nb= sp; = &nb= sp; = Fixup

=3D=3D=3D= =3D=3D = &nb= sp; = &nb= sp; = Fixup

CROSS SECT= IONS ARE READ FROM ISCRC (ORIGINAL) AND ISCRD (NEW) Fixup

AND ARE WR= ITTEN IN THE ENDF/B FORMAT ON OTAPE. THE BEGINNING OF Fixup

EACH SECTI= ON OF ORIGINAL DATA IS READ FROM ISCRC (TO DEFINE Fixup

SECTION HEADER INFORMATION). IF THI= S MT HAS NOT BEEN RECOSTRUCTED Fixup

ON ISCRD T= HE ORIGINAL SECTION IS OUTPUT. IF THE SECTION HAS BEEN Fixup

RECONSTRUC= TED THE ORIGINAL SECTION IS SKIPPED AND THE NEW SECTION Fixup

IS OUTPUT.= = &nb= sp; = &nb= sp; Fixup

OTAPE - OUTPUT DATA IN THE ENDF/B FORMAT= . = &nb= sp; Fixup

ISCRC - SCRATCH FILE FROM WHICH ORIGINAL= DATA IS READ. = Fixup

ISCRD - SCRATCH FILE FROM WHICH NEW DATA= IS READ. = Fixup

TABC - ARRAY INTO WHICH CROSS SEC= TIONS ARE READ FROM SCRATCH &nb= sp; Fixup

= AND WRITTEN TO OTAPE = &nb= sp; = Fixup

= &nb= sp; = = &nb= sp; = Fixup

I/O FILE DEFINITIONS = &nb= sp; = &nb= sp; Fixup

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D = &nb= sp; = &nb= sp; Fixup

UNIT DESCRIPTION = = &nb= sp; Fixup

=3D=3D=3D= =3D =3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D = &nb= sp; = &nb= sp; Fixup

2 INPUT PARAMETERS. = &nb= sp; = Fixup

3 OUTPUT REPORT. = &nb= sp; = Fixup

10 ORIGINAL DATA IN THE E= NDF/B FORMAT. = &nb= sp; Fixup

11 FINAL DATA IN THE ENDF= /B FORMAT. = &nb= sp; Fixup

12 SCRATCH FILE = &nb= sp; = = Fixup

14 SCRATCH FILE = &nb= sp; = &nb= sp; Fixup

15 SCRATCH FILE = &nb= sp; = &nb= sp; Fixup

16 SCRATCH FILE = &nb= sp; = &nb= sp; Fixup

17 SCRATCH FILE = &nb= sp; = &nb= sp; Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

OPTIONAL STANDARD FILE NAMES (SEE SUBROUTINE FILIO1 AND FILIO2) Fixup

=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D Fixup

UNIT FILE NAME FORMAT = &nb= sp; = Fixup

=3D=3D=3D= =3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D = &nb= sp; = Fixup

2 FIXUP.INP BCD = &nb= sp; = Fixup

3 FIXUP.LST BCD = &nb= sp; = Fixup

10 ENDFB.IN BCD = &nb= sp; = Fixup

11 ENDFB.OUT BCD = &nb= sp; = Fixup

12-17 (SCRATCH) BINARY = &nb= sp; = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

INPUT LINE= S = = &nb= sp; = Fixup

=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D = &nb= sp; = &nb= sp; Fixup

LINE COLUMNS FORMAT DESCRIPTION = &nb= sp; Fixup

=3D=3D=3D= =3D =3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<= span style=3D'mso-spacerun:yes'> = &nb= sp; Fixup

<= /p>

1 1-14 14I1 INPUT OPTIONS AS DESCRIBED ABOVE. = Fixup

= &nb= sp; EACH COLUMN OF THE INPUT LINE CONTROLS Fixup

= &nb= sp; ONE OF THE TESTS/CORRECTIONS DESCRIBED Fixup

= &nb= sp; ABOVE. TESTS/CORRECTION 1-14 (NOT ALL Fixu= p

= &nb= sp; IMPLEMENTED YET) CORRESPOND TO COLUMNS Fixup

= &nb= sp; 1-14 OF THIS INPUT LINE AND ARE TREATED Fixup

= &nb= sp; AS FOLLOWS, = &nb= sp; Fixup

= &nb= sp; =3D 0 - DO NOT PERFORM TEST/CORRECTION. Fixu= p

= &nb= sp; =3D 1 - PERFORM TEST/CORRECTION. = Fixup

= &nb= sp; FOR MT EXCLUSION FROM THRESHOLD TESTS Fixu= p

= &nb= sp; (COLUMN 2), DELETION (COLUMN 4), OR Fixup

= &nb= sp; SUMMATION (COLUMN 5) THE INPUT OPTION Fixu= p

= &nb= sp; MAY BE, &nbs= p; &= nbsp; &nbs= p; Fixup

= &nb= sp; =3D 1 - READ RULES FROM INPUT = Fixup

= &nb= sp; =3D 2 - USE BUILT-IN RULES = Fixup

2 1-60 A60 ENDF/B INPUT DATA FILENAME = Fixup

= &nb= sp; (STANDARD OPTION =3D ENDFB.IN) = Fixup

3 1-60 A60 ENDF/B OUTPUT DATA FILENAME<= span style=3D'mso-spacerun:yes'> = Fixup

= = (STANDARD OPTION =3D ENDFB.OUT) = Fixup

4-M 1-5 FREE CHARACTER (S,D,T,R,*) FOLLOW= ED BY BLANK OR Fixup

= &nb= sp; FORM MT NUMBER = &nb= sp; = Fixup

= &nb= sp; - THE ALLOWED CHARACTERS ARE, = Fixup

= &nb= sp; - S OR BLANK =3D SUM (OR DIFFERENCES) Fixup

= &nb= sp; - D =3D DELETE = &nb= sp; Fixup

= &nb= sp; - T =3D NO THRESHOLD ENERGY CORRECTIONS Fixu= p

= &nb= sp; - R =3D RATIO = &nb= sp; Fixup

= &nb= sp; - * =3D PRODUCT = &nb= sp; Fixup

= 6-72 FREE UP TO 10 LO= WER AND UPPER MT RANGES WHICH Fixup

= &nb= sp; FORM WILL BE USE= D TO DEFINE THE RECONSTRUCTED Fixup

= &nb= sp; CROSS SECTION OR TO DEFINE MT RANGES WHICH Fixup

= &nb= sp; ARE EXCLUDED FROM THRESHOLD TESTS. = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

= &nb= sp; EACH MT NUMBER IS DEFINED BY A CONTINUOUS Fixup

= &nb= sp; STRING OF DIGITS, POSSIBILITY PRECEEDED BY Fixup

= &nb= sp; A - (MINUS SIGN). EACH MT NUMBER MUST BE Fixup

= &nb= sp; BLANK OR OTHERWISE (NOT A DIGIT) DELIMITED. Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

= &nb= sp; COLUMNS 6-72 MAY CONTAIN STRINGS OF DIGITS Fixup

= &nb= sp; THE FIRST DIGIT STRING OF EACH PAIR MAY BE Fixup

= &nb= sp; PRECEEDED BY A - (MINUS SIGN). = Fixup

= &nb= sp; = &nb= sp; = Fixup

= &nb= sp; EACH LINE WILL BE INTERPRETED AS FOLLOWS, Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

= = *SUMMATION (OR DIFFERENCES) = Fixup

= &nb= sp; -------------------------- = Fixup

= &nb= sp; COLUMNS 1-5 =3D S OR BLANK FOLLOWED BY THE Fixup

= &nb= sp; MT NUMBER TO BE DEFINE= D BY SUMMATION Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

= &nb= sp; COLUMNS 6-72 =3D UP TO 10 MT RANGE (PAIRS OF Fixup

= &nb= sp; MT NUMBERS) TO BE USED TO DEFINED THE SUM. Fixup

= &nb= sp; IF THE FIRST MT NUMBER OF A PAIR IS Fixup

= &nb= sp; NEGATIVE THE RANGE OF MT NUMBERS IS Fixup

= &nb= sp; SUBTRACTED - AT LEAST ONE RANGE MUST BE Fixup

= &nb= sp; SPECIFIED. &= nbsp; &nbs= p; &= nbsp; Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

= &nb= sp; *DELETIONS &= nbsp; &nbs= p; = Fixup

= &nb= sp; --------- &n= bsp; = ; &n= bsp; Fixup

= &nb= sp; COLUMNS 1-5 =3D D FOLLOWED BY BLANKS = Fixup

= &nb= sp; = &nb= sp; = Fixup

= &nb= sp; COLUMNS 6-72 CONTAIN UP TO 10 MT RANGE Fixup

= &nb= sp; (PAIRS OF MT NUMBERS), EACH RANGE DEFINING Fixup

= &nb= sp; A RANGE OF MT NUMBERS TO BE DELETED - AT Fixup

= &nb= sp; LEAST ONE RANGE MUST BE SPECIFIED. = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

= &nb= sp; *EXCLUSION FROM THRESHOLD TESTS = Fixup

= &nb= sp; ------------------------------ = Fixup

= &nb= sp; COLUMNS 1=3D5 =3D T FOLLOWED BY BLANKS = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

= = COLUMNS 6-72 CONTAIN UP TO 10 MT RANGE Fixup

= &nb= sp; (PAIRS OF MT NUMBERS), EACH RANGE DEFINING Fixup

= &nb= sp; A RANGE OF MT NUMBERS WHOSE THRESHOLD Fixu= p

= &nb= sp; ENERGY WIL= L NOT BE CHECKED - AT LEAST ONE Fixup

= &nb= sp; RANGE MUST BE SPECIFIED. = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

= &nb= sp; *RATIO = &nb= sp; = Fixup

= &nb= sp; ----- = &nb= sp; = Fixup

= &nb= sp; COLUMNS 1-5 =3D R FOLLOWED BY THE MT NUMBER Fixup

= &nb= sp; TO BE DEFINED BY A RATIO = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

= &nb= sp; COLUMNS 6-72 CONTAINS 2 MT NUMBERS TO BE Fixup

= &nb= sp; USED TO DEFINE THE RATIO. = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

= &nb= sp; *PRODUCT &nb= sp; = &nb= sp; Fixup

= &nb= sp; ----- = &nb= sp; = Fixup

= &nb= sp; COLUMNS 1-5 =3D * FOLLOWED BY THE MT NUMBER Fixup

= &nb= sp; TO BE DEFINED BY A PRODUCT = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

= &nb= sp; COLUMNS 6-72 CONTAINS 2 MT NUMBERS TO BE Fixup

= &nb= sp; USED TO DEFINE THE PRODUCT. = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

= &nb= sp; CONVENTIONS = &nb= sp; Fixup

= &nb= sp; ----------- = &nb= sp; Fixup

= &nb= sp; *UP TO 20 DELETIONS AND 20 SUMMATIONS OR Fixup

= = RATIOS OR PRODUCTS MAY BE SPECIFIED. Fixup

= &nb= sp; *ONLY 1 EXCLUSION FROM THRESHOLD TESTS Fixu= p

= &nb= sp; MAY BE SPECIFIED (THE 1 LINE MAY CONTAIN Fixup

= &nb= sp; UP TO 10 MT RANGES TO EXCLUDE FROM TESTS).&nb= sp; Fixup

= &nb= sp; *INPUT IS TERMINATED BY INPUTTNG 0 OR Fixup

= &nb= sp; BLANK IN COLUMNS 1-72 (I.E. THE LAST Fixup

= &nb= sp; INPUT LINE MUST BE BLANK). = Fixup

= &nb= sp; *THE UPPER LIMIT OF EACH RANGE MUST BE AT Fixup

= &nb= sp; LEAST AS BIG AS THE LOWER LIMIT (IN Fixup

= &nb= sp; ABSOLUTE VALUE). = &nb= sp; Fixup

= &nb= sp; *FOR RECONSTRUCTION POSITIVE MT RANGES WILL Fixup

= &nb= sp; BE ADDED TO THE SUM AND NEGATIVE MT RANGES Fixup

= &nb= sp; WILL BE SUBTRACTED. = Fi= xup

= &nb= sp; *IF INPUT OPTION 2 (FIRST INPUT LINE) IS Fixup

= &nb= sp; 0 THRESHOLD EXCLUSION IS NOT ALLOWED. Fixu= p

= &nb= sp; *IF INPUT OPTION 4 (FIRST INPUT LINE) IS Fixup

= &nb= sp; 0 DELETIONS ARE NOT ALLOWED. = Fixup

= &nb= sp; *IF INPUT OPTION 5 (FIRST INPUT LINE) IS Fixup

= &nb= sp; 0 SUMMATIONS AND RATIOS ARE NOT ALLOWED. Fixup

N-K = IF THE USER SPECIFIES THAT SECTIONS WHICH Fixup

= &nb= sp; ARE NOT PRESENT IN THE ORIGINAL EVALUATION Fixup

= &nb= sp; MAY BE CREATED, TWO LINES MUST BE INPUT FOR Fixup

= &nb= sp; EACH SECTION TO BE CREATED. THE TWO LINES = Fixup

= &nb= sp; DEFINE (C1, C2, L1 AND L2) FOR EACH OF THE Fixup

= &nb= sp; FIRST TWO LINES OF THE SECTION TO BE Fixup

= = CREATED. THE FIRST LINE ALSO DEFINES (MAT &nbs= p; Fixup

= &nb= sp; AND MT). (N1, N2) ARE ALWAYS ZERO ON THE Fixup

= &nb= sp; FIRST LINE AND WILL BE CALCULATED BY THE Fixup

= &nb= sp; PROGRAM FOR THE SECOND LINE. = Fixup

FIRST 1-11 E11.4 ZA OF SECTION TO BE CREATED = Fixup

LINE 12-22 E11.4 AWRE OF SECTION TO BE CREATED = Fixup

= 23-33 I11 L1 OF SECTIO= N TO BE CREATED = Fixup

= 34-44 I11 L2 OF SECTIO= N TO BE CREATED = Fixup

= 45-48 I4 MAT OF SECTION TO BE CREATED = Fixup

= 49-51 I3 MT OF S= ECTION TO BE CREATED = Fixup

SECOND 1-11 E11.4 C1 OF SECTION TO BE CREATED = Fixup

LINE 12-22 E11.4 C2 OF SECTION TO BE CREATED = Fixup

= 23-33 I11 L1 OF SECTIO= N TO BE CREATED = Fixup

= 34-44 I11 L2 OF SECTIO= N TO BE CREATED = Fixup

= &nb= sp; *PAIRS OF LINES MAY BE IN ANY MAT/MT ORDER Fixup

= &nb= sp; (E.G., THEY NEED NOT BE IN ASCENDING Fixup

= &nb= sp; MAT/MT ORDER). = &nb= sp; Fixup

= &nb= sp; *UP TO 50 PAIRS OF LINES MAY BE USED TO Fixup

= &nb= sp; DEFINE SECTIONS TO BE CREATED. THE LIST Fixup

= &nb= sp; IS TERMINATED WHEN THE FIRST LINE OF A Fixup

= &nb= sp; PAIR CONTAINS A ZERO (OR BLANK) MAT AND/OR Fixup

= &nb= sp; MT. &n= bsp; = ; &n= bsp; Fixup

M-N = IF THE USER SPECIFIES THAT ENERGIES WHICH Fixup

= &nb= sp; ARE NOT PRESENT IN THE ORIGINAL EVALUATION Fixup

= &nb= sp; MAY BE INSERTED, ONE LINE MUST BE INPUT FOR Fixup

= = EA= CH ENERGY TO BE INSERTED. = Fixup

= 1-11 E11.4= ENERGY TO BE INSERTED = &nb= sp; Fixup

= 12-15 I4 M= AT IN WHICH TO INSERT ENERGY =3D 0 =3D ALL Fixup

= 16-18 I3 MT IN WHICH TO I= NSERT ENERGY =3D 0 =3D ALL &nbs= p; Fixup

= &nb= sp; *UP TO 50 (ENERGY, MAT, MT) LINES MAY BE Fixup

= &nb= sp; USED. THE LIST IS TERMINATED BY A BLANK Fixup

= &nb= sp; LINE. = &nb= sp; = Fixup

= &nb= sp; *INPUT MAY BE IN ANY (ENERGY, MAT, MT) Fixu= p

= &nb= sp; ORDER. = ; &n= bsp; = ; Fixup

= &nb= sp; *ENERGY POINTS CAN ONLY BE INSERTED WITHIN Fixup

= &nb= sp; THE ORIGINAL ENERGY RANGE OF A SECTION - Fixup

= &nb= sp; THIS OPTION CANNOT BE USED TO EXTEND THE Fixup

= &nb= sp; CROSS SECTION EITHER BELOW OR ABOVE THE Fixup

= &nb= sp; ORIGINAL TABULATED ENERGY RANGE. = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

EXAMPLE IN= PUT NO. 1 = &nb= sp; = = Fixup

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D = &nb= sp; = &nb= sp; Fixup

(1) USE OP= TIONS 1-11 (ALL OPTIONS, EXCEPT INSERT ENERGY POINTS) Fixup

(2) DELETE MT=3D900 (FOR EXAMPLE PURPOSES ONLY) = Fixup

(3) DEFINE= THE FOLLOWING MT NUMBERS TO BE RECONSTRUCTED, = Fixup

= (MT=3D 4) =3D THE SUM = OF MT=3D 51 THROUGH 91 = &nb= sp; Fixup

= (MT=3D103) =3D THE SUM OF MT=3D700 THROUGH 718 (NOT 719) = Fixup

= (MT=3D104) =3D THE SUM OF MT=3D720 THROUGH 738 (NOT 739) = Fixup

= (MT=3D105) =3D THE SUM OF MT=3D740 THROUGH 758 (NOT 759) = Fixup

= (MT=3D106) =3D THE SUM OF MT=3D760 THROUGH 778 (NOT 779) = Fixup

(MT=3D107) =3D THE SUM OF MT= =3D780 THROUGH 798 (NOT 799) = Fixup

= (MT=3D101) =3D THE SUM OF MT=3D102 THROUGH 114 = &nb= sp; Fixup

= (MT=3D 18) =3D (MT=3D19) + (MT=3D20 AND 21) + (MT=3D38) = Fixup

= (IF TOTAL FISSION, MT=3D18, IS NOT PRESENT, DEFINE Fixup

= IT BY SUMMING FIRST, SECOND, ETC. CHANCE - NOTE Fixup

= THAT THIS MUST BE DONE IN THIS ORDER, SINCE THE Fixup

= NEXT SUM INVOLVES USING MT=3D18. = &nb= sp; Fixup

= (MT=3D 27) =3D THE SUM OF MT=3D 18 AND 101 = &nb= sp; Fixup

= (MT=3D101 RECONSTRUCTED ABOVE USED IN SUM). = Fixup

= (MT=3D 3) =3D THE SUM = OF (MT=3D4)+(MT=3D6-9)+(MT=3D16-17)+(MT=3D22-37)+ Fixup

= (MT=3D41-45) = &nb= sp; = Fixup

= (MT=3D4 AND 27 RECONSTRUCTED ABOVE USED IN SUM). Fixup

= (MT=3D 19) =3D (MT=3D18) - (MT=3D20 AND 21) - (MT=3D38) = Fixup

= (DEFINE FIRST CHANGE FISSION BY SUBTRACTION TO Fixup

= ALLOW RESONANCE CONTRIBUTION FROM MT=3D18 TO BE Fixu= p

= INCLUDED IN MT=3D19). = = Fixup

= (MT=3D 1) =3D THE SUM = OF MT=3D2 AND 3 = &nb= sp; Fixup

= (MT=3D3 RECONSTRUCTED ABOVE USED IN SUM). = Fixup

(4) THRESHOLD EN= ERGIES OF THE FOLLOWING MT NUMBERS WILL NOT BE Fixup

= TESTED OR CORRECTED. = &nb= sp; = Fixup

= MT=3D1, 4, 18, 19, 91, 103 THROUGH 114. = &nb= sp; Fixup

(5) DEFINE MT=3D= 254 TO BE THE CAPTURE TO FISSION RATIO (MT=3D102/18) Fixup

(6) CREATE MAT=3D1300/MT=3D254 - NOTE, THIS IS NECESSARY IN ORDER TO Fixup

HAVE THE CAPTURE TO FISSION RATIO OUTPUT IN THE ENDF/B FORMAT Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

NOTE, ON T= HE FOLLOWING INPUT LINES THE CHARACTERS =3D ( ) + , HAVE Fixup

BEEN USED = ONLY TO MAKE THE INPUT MORE READABLE - THESE CHARACTERS Fixup

WILL BE SK= IPPED BY THE PROGRAM IN READING INPUT - THE RESULTS Fixup

WOULD BE T= HE SAME IF THESE CHARACTERS WERE OMITTED, AS LONG AS Fixup

ALL OF THE= MT NUMBERS ARE DELIMITED, I.E., THERE IS AT LEAST ONE Fixup

NON-DIGITAL CHARACTER BETWEEN MT NUMBERS. NOTE, THAT - (MINUS Fixup

SIGN) IS IMPORTANT AND IS USED DURING INPUT TO DEFINE MT RANGES Fixup

WHICH SHOU= LD BE SUBTRACTED, E.,G., SEE THE DEFINITION OF MT=3D19. Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

READ FILE /ENDFB6/K300/LEAD.IN AND WRITE /ENDFB6/K300/LEAD.OUT Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

THE FOLLOW= ING 21 INPUT LINES ARE REQUIRED. = &nb= sp; Fixup

= &nb= sp; = = &nb= sp; Fixup

1111111111= 1 = &nb= sp; = &nb= sp; Fixup

/ENDFB6/K300/LEAD.IN = &nb= sp; = &nb= sp; Fixup

/ENDFB6/K300/LEAD.OUT = &nb= sp; = Fixup

D900 = &nb= sp; = &nb= sp; = Fixup

4=3D( 51, 91) = &nb= sp; = &nb= sp; Fixup

103=3D(700,718) = &nb= sp; = Fixup

104=3D(720,738) = &nb= sp; = &nb= sp; Fixup

105=3D(740,758) = &nb= sp; = &nb= sp; Fixup

106=3D(760,778) = &nb= sp; = &nb= sp; Fixup

107=3D(780,798) = &nb= sp; = &nb= sp; Fixup

101=3D(102,114) = &nb= sp; = &nb= sp; Fixup

18=3D( 19, 19)+( 20, 21)+( 38, 38) = &nb= sp; Fixup

27=3D( 18, 18)+(101,101) = &nb= sp; = Fixup

3=3D( 4, 4)+( 6, 9)+( 16, 17)+( 22, 37)+( 41, 45) = Fixup

19=3D( 18, 18)-( 20, 21)-( 38, 38) = &nb= sp; Fixup

1=3D( 2, 3) = &nb= sp; = &nb= sp; Fixup

T ( 1, 1) ( 4, 4) ( 18, 19) ( 91, 91) (103,114) = Fixup

R254=3D(10= 2/ 18) = &nb= sp; = &nb= sp; Fixup

= (BLANK LINE TO TERMINATE SUMMATION/DELETION RULES) Fixup

2.00= 400+ 3 0.00000+ 0 = 0 &nbs= p; 01300254 = Fixup

0.00= 000+ 0 0.00000+ 0 = 0 &nbs= p; 0 = &nb= sp; Fixup

= (BLANK LINE TO TERMINATE SECTION CREATION RULES) Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

NOTE, THE DELETION AND THRESHOLD EXCLUSION LINES MAY APPEAR IN Fixup

IN ANY ORD= ER. HOWEVER, SUMMATION AND RATIO RULES MUST APPEAR IN Fixup

THE ORDER = IN WHICH YOU WANT THEM TO BE EXECUTED - E.G., THE Fixup

ABOVE INPU= T WILL FIRST RECONSTRUCT MT=3D4, WHICH CAN THEN BE USED Fixup

TO CONTRIB= UTE TO THE FOLLOWING SUM TO DEFINE MT=3D3, WHICH IN TURN Fixup

CAN THEN B= E USED TO CONTRIBUTE TO THE FOLLOWING SUM TO DEFINE Fixup

MT=3D1. IF= THE ORDER OF THE INPUT LINES IS CHANGED SUCH THAT MT=3D3 Fixup

IS RECONST= RUCTED BEFORE MT=3D4, THE ORIGINAL MT=3D4 WILL BE USED IN Fixup

THE SUMMAT= ION TO DEFINE MT=3D3. THE SAME RULES APPLY TO CALCULATING Fixup

RATIOS, IF EITHER THE NUMERATOR OR DENOMINATOR IS TO BE DEFINED Fixup

BY SUMMATI= ON, THIS SHOULD BE DONE BEFORE DEFINING THE RATIO BY Fixup

INPUT PARAMETERS. = &nb= sp; = &nb= sp; Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

EXAMPLE IN= PUT NO. 2 = &nb= sp; = &nb= sp; Fixup

=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D = &nb= sp; = &nb= sp; Fixup

(1) USE OP= TIONS 1-11 (ALL OPTIONS, EXCEPT INSERT ENERGY POINTS) Fixup

(2) USE BU= ILT-IN TABLES FOR SUMMATION/DELETION/THRESHOLD EXCLUSION Fixup

= (THIS ONLY REQUIRES COLUMNS 2, 4 AND 5 TO BE SET =3D2 ON THE Fixup

= FIRST INPUT LINE. THE BUILT-IN RULES EXACTLY CORRESPOND TO Fixup

= THE INPUT ABOVE UNDER EXAMPLE NO. 1, EXCEPT THAT NO MT NUMBERS Fixup

= WILL BE DELETED. = &nb= sp; = &nb= sp; Fixup

(3) IF NOT PRESENT, CREATE MAT=3D1300/MT=3D1 = &nb= sp; Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

USE THE ST= ANDARD FILE NAMES ENDFB.IN AND ENDFB.OUT (THIS CAN BE Fixup

DONE BY LE= AVING THE SECOND AND THIRD INPUT LINES BLANK). = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

THE FOLLOW= ING 6 INPUT LINES ARE REQUIRED. = &nb= sp; Fixup

<= /p>

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

1212211111= 1 = &nb= sp; = &nb= sp; Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

2.00= 400+ 3 0.00000+ 0 = 0 &nbs= p; 01300 1 = Fixup

0.00= 000+ 0 0.00000+ 0 = 0 &nbs= p; 0 = = Fixup

= (BLANK LINE TO TERMINATE SECTION CREATION RULES) Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

EXAMPLE IN= PUT NO. 3 = &nb= sp; = Fixup

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D = &nb= sp; = &nb= sp; Fixup

(1) USE OP= TIONS 1-10 (ALL OPTIONS PRESENTLY IMPLEMENTED, EXCEPT Fixup

= DO NOT ALLOW SECTION CREATION AND INSERT ENERGY POINTS). Fixu= p

(2) USE BU= ILT-IN TABLES FOR SUMMATION/DELETION/THRESHOLD EXCLUSION Fixup

= (THIS ONLY REQUIRES COLUMNS 2, 4 AND 5 TO BE SET =3D2 ON THE Fixup

= FIRST INPUT LINE. THE BUILT-IN RULES EXACTLY CORRESPOND TO Fixup

THE INPUT ABOVE UNDER EXAMPLE NO. 1, EXCEPT THAT NO MT NUMBERS Fixup

= WILL BE DELETED. = &nb= sp; = &nb= sp; Fixup

(3) DO NOT CREATE ANY SECTIONS. = &nb= sp; = Fixup

= = &nb= sp; = &nb= sp; Fixup

READ FILE /ENDFB6/K300/LEAD.IN AND WRITE /ENDFB6/K300/LEAD.OUT Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

THE FOLLOW= ING 3 INPUT LINES ARE REQUIRED. = &nb= sp; Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

1212211111= = &nb= sp; = &nb= sp; Fixup

/ENDFB6/K300/LEAD.IN = = &nb= sp; = Fixup

/ENDFB6/K300/LEAD.OUT = &nb= sp; = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

EXAMPLE IN= PUT NO. 4 = &nb= sp; = &nb= sp; Fixup

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D = &nb= sp; = &nb= sp; Fixup

SAME AS EX= AMPLE NO. 3, ABOVE, EXCEPT INSERT AN ENERGY POINT AT Fixup

THERMAL FO= R ALL REACTIONS WHICH SPAN THE THERMAL ENERGY RANGE. Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

USE THE ST= ANDARD FILE NAMES ENDFB.IN AND ENDFB.OUT (THIS CAN BE Fixup

DONE BY LE= AVING THE SECOND AND THIRD INPUT LINES BLANK). Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

THE FOLLOW= ING 5 INPUT LINES ARE REQUIRED. = &nb= sp; Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

121221111101 = &nb= sp; = &nb= sp; Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

2.53= 000- 2 0 0 = &nb= sp; = &nb= sp; Fixup

= (BLANK LINE TO TERMINATE ENERGY INSERTS) = Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

WARNING = &nb= sp; = &nb= sp; Fixup=

=3D=3D=3D= =3D=3D=3D=3D = &nb= sp; = &nb= sp; = Fixup

ALTHOUGH T= HIS PROGRAM IS DESIGNED TO ALLOW REACTIONS TO BE DEFINED Fixup

BY ADDING = OR SUBTRACTING REACTIONS THE USER SHOULD ALWAYS TRY TO Fixup

DEFINE REA= CTIONS BY SUMMING TO AVOID NEGATIVE CROSS SECTIONS. FOR Fixup

EXAMPLE, I= T IS POSSIBLE TO CALCULATE MT=3D3 AND DEFINE MT=3D1 AS THE Fixup

SUM OF MT= =3D2 AND 3 (THE RECOMMENDED APPROACH AS USED IN THE ABOVE Fixup

INPUT). ALTERATIVELY IT IS POSSIBLE TO CALCULATE MT=3D1 AND DEFINE Fixup

MT=3D3 AS = MT=3D1 MINUS MT=3D2 (THIS APPROACH IS NOT RECOMMENDED). Fixup

= &nb= sp; = &nb= sp; = &nb= sp; Fixup

THE ONLY BUILT-IN SUMMATION RULE THAT USES SUBTRACTION IS THE Fixup

CALCULATIO= N OF THE FIRST CHANGE FISSION (MT=3D19) AS THE TOTAL Fixu= p

FISSION (M= T=3D18) MINUS THE SECOND, THIRD AND FOURTH CHANGE FISSION Fixup

(MT=3D20, = 21, 38). THIS HAS BEEN DONE TO ALLOW THE RESONANCE Fixup

CONTRIBUTI= ON, CALCULATED BY MANY CODES AND INCLUDED IN MT=3D18, Fixup

TO BE CONSISTENTLY INCLUDED IN THE FIRST CHANCE FISSION. Fixup=

= &nb= sp; = &nb= sp; = &nb= sp; Fixup