DPA cross-section data for Eurofer prepared by NJOY in ACE format 
 ("dosimtery data"). Two data sets are provided on the file:


 a) DPA data using advanced BCA/MD damage model (Kerntechnik 80 (2015), 1-12) 

!    It is supposed that each PKA moves in the Eurofer steel matrix.
!    Non standard MT = 900 is used.  


 b) Standard NRT model.
     Results of standard NJOY calculation.  Each PKA moves in the same 
     matrix material, e.g. Fe in Fe, Cr in Cr, W and W, etc. 
     Ed is set equal to 40 eV.

!    Non standard MT = 901 is used (instead of standard MT=444) !!!


  A.Yu.Konobeyev et al, Karlsruhe Institute of Technology (KIT) 2013.


Files

dpa_xs            :     Displacement cross-sections in ACE format

xsdir_eurofer     :   	line for xsdir file