DPA cross-section data for Eurofer. Two data sets are provided on the file:


 a) DPA data using advanced BCA/MD damage model (Kerntechnik 80 (2015), 1-12) 

!    It is supposed that each PKA moves in the Eurofer steel matrix.
!    Non standard MT = 900 is used to record displacement cross-sections in barn


 b) Standard NRT model.
     Results of standard NJOY calculation.  Each PKA moves in the same 
     matrix material, e.g. Fe in Fe, Cr in Cr, W and W, etc. 
     Ed is set equal to 40 eV.

!    Non standard MT = 901 is used for displacement cross-sections in barn 
!    (instead of standard MT=444) 


  A.Yu.Konobeyev et al, Karlsruhe Institute of Technology (KIT) 2013.


File

Eurofer_ENDF  :   Displacement cross-sections in ENDF-6 format