WIMS Library Update Project |
H2O-moderated UO2-PuO2 (MOX) critical lattices-MOX-LW (CRITMOX)
H2O-moderated UO2-PuO2 critical lattices
Laboratory: WAPD Westinghouse Atomic Power Department (USA)
Facility: CR
These
benchmarks are six H2O moderated lattices of natural uranium oxide-plutonium
oxide rods in square patterns. Material bucklings were measured.
Pitch (cm) | wcrx_pu1:
1.752 wcrx_pu2: 1.905 wcrx_pu3: 2.479 wcrx_pu4: 2.695 wcrx_pu5: 3.505 wcrx_pu6: 1.321 |
|
Lattice geometry | Square | |
Water/fuel volume ratio | wcrx_pu1:
1.123 wcrx_pu2: 1.556 wcrx_pu3: 3.502 wcrx_pu4: 4.367 wcrx_pu5: 8.257 wcrx_pu6: 1.683 |
|
Moderator | H2O | |
Fuel material | wcrx_pu1-5:
UO2(natural)+2.0w%PuO2 wcrx_pu6:UO2(natural)+6.6w%PuO2 |
|
Fuel Density (g/cm3) | wcrx_pu1-5:
9.54 wcrx_pu6: 10.77 |
|
Radius of fuel rods (cm) | wcrx_pu1-5:
0.6415 wcrx_pu6: 0.4285 |
|
Clad material | wcrx_pu1-5:
Zr-2 wcrx_pu6: Zr-4 |
|
Outer radius of clad (cm) | wcrx_pu1-5:
0.7175 wcrx_pu6: 0.4965 |
|
Thickness of clad (cm) | wcrx_pu1-5:
0.0762 wcrx_pu6: 0.0590 |
|
Temperature (K) | wcrx_pu1-5:
293 wcrx_pu6: 299 |
|
Experimental
buckling (1/cm2) |
wcrx_pu1:
0.006956 0.000100 wcrx_pu2: 0.009000 0.000090 wcrx_pu3: 0.007950 0.000110 wcrx_pu4: 0.007330 0.000070 wcrx_pu5: 0.005030 0.000030 wcrx_pu6: 0.010880 0.000130 |
|
Pu isotopic composition (w %) | wcrx_pu1-2,5 | Pu239:
91.610 Pu240: 7.654 Pu241: 0.701 Pu242: 0.031 |
wcrx_pu3,4
|
Pu239:
71.760
Pu240: 23.500 Pu241: 4.080 Pu242: 0.656 |
|
wcrx_pu6
|
Pu239:
90.490
Pu240: 8.570 Pu241: 0.890 Pu242: 0.040 |
4.02)
MOX-LW-JAERI-TCA
H2O-moderated UO2-PuO2 critical lattices
Laboratory: JAERI Japan Atomic Energy Research Institute,
Tokai Research Establishment (Japan)
Facility: TCA Tank
type Critical Assembly
These benchmarks are four H2O moderated lattices of natural uranium
oxide-plutonium oxide rods in square patterns. Material bucklings were
measured.
Pitch (cm) | jtca_pu1:
1.825 jtca_pu2: 1.956 jtca_pu3: 2.225 jtca_pu4: 1.474 |
Lattice geometry | Square |
Water/fuel volume ratio | jtca_pu1:
2.42 jtca_pu2: 2.98 jtca_pu3: 4.24 jtca_pu4: 5.55 |
Moderator | H2O |
Fuel material | UO2(natural) + 3.01%PuO2 |
Americium-241 content | 530 ppm in PuO2 (1) |
Impurity content | 0.9
ppm equivalent boron concentrationin PuO2-UO2 |
Fuel Density (g/cm3) | 6.056 |
Radius of fuel rods (cm) | 0.5325 |
Clad material | Zr-2 |
Cladding density (g/cm3) | 6.523 |
Outer radius of clad (cm) | 0.6115 |
Thickness of clad (cm) | 0.0700 |
Temperature (K) | 293 |
Experimental
buckling (1/cm2) |
jtca_pu1:
0.008064 0.000005 jtca_pu2: 0.008311 0.000006 jtca_pu3: 0.007782 0.000002 jtca_pu4: 0.006491 0.000004 |
Pu isotopic composition (w%) | Pu238:
0.494 Pu239: 68.180 Pu240: 22.020 Pu241: 7.260 Pu242: 2.040 |
H2O-moderated UO2-PuO2 lattices (exponential experiments)
Laboratory: GE - General Electric Company (USA)
These
benchmarks are six H2O moderated lattices of depleted uranium oxide
(0.22 w % U235)-plutonium oxide rods in hexagonal patterns. Material bucklings
were measured from exponential experiments.
Pitch (cm) |
ge_pu1:
1.397 |
Lattice geometry |
Hexagonal |
Water/fuel volumen ratio |
ge_pu1:
1.100 |
Moderator |
H2O |
Fuel material |
UO2(0.22 W% U235)+1.5 w% PuO2 |
Fuel Density (g/cm3) |
9.65 |
Radius of fuel rods (cm) |
|
Clad material |
|
Outer radius of clad (cm) |
0.541 |
Thickness of clad (cm) |
0.069 |
Temperature (K) |
293 |
Experimental
buckling |
ge_pu1:
0.00480 0.00012 |
Pu isotopic composition (w%) |
Pu239:
91.41 |
H2O-moderated UO2-PuO2 lattices (exponential experiments)
Laboratory: BNW - Battelle NorthWest Laboratory (USA)
These
benchmarks are 24 H2O moderated lattices of natural uranium oxide-plutonium
oxide rods in hexagonal patterns. Material bucklings were measured from exponential
experiments.
Pitch (cm) | bnw_pua1,c1,d1:
2.032 bnw_pud2: 2.159 bnw_pua2,b1,c2,d3: 2.362 bnw_pua3,b2,c3: 2.667 bnw_pua4,b3,c4: 2.903 bnw_pua5,b4,c5: 3.352 bnw_pua6,b5,c6: 3.420 bnw_pud4: 3.519 bnw_pua7: 4.064 bnw_pua8: 4.089 bnw_pud5: 4.318 |
|
Lattice geometry | Hexagonal | |
Water/fuel volume ratio | bnw_pua1,c1:
1.486 bnw_pud1: 1.564 bnw_pud2: 1.929 bnw_pua2,b1,c2: 2.447 bnw_pud3: 2.563 bnw_pua3,b2,c3: 3.463 bnw_pua4,b3,c4: 4.335 bnw_pua5,b4,c5: 6.196 bnw_pua6,b5,c6: 6.501 bnw_pud4: 7.271 bnw_pua7: 9.696 bnw_pua8: 9.831 bnw_pud5: 11.58 |
|
Moderator | H2O | |
Fuel material | bnw_pua-c:
Natural UO2+2.0 w% PuO2 bnw_pud: Natural UO2+4.0 w% PuO2 |
|
Fuel Density (g/cm3) | bnw_pua-c:
9.54 bnw_pud: 9.46 |
|
Radius of fuel rods (cm) | bnw_pua-c:
0.645 bnw_pud: 0.632 |
|
Clad material | Zr-2 | |
Outer radius of clad (cm) | bnw_pua-c:
0.7215 bnw_pud: 0.7175 |
|
Thickness of clad (cm) | bnw_pua-c:
0.076 bnw_pud: 0.086 |
|
Temperature (K) | 293 | |
Experimental
buckling (1/cm2) |
bnw_pua1:
0.00880 0.00003 bnw_pua2: 0.01029 0.00003 bnw_pua3: 0.01034 0.00006 bnw_pua4: 0.00978 0.00004 bnw_pua5: 0.00768 0.00003 bnw_pua6: 0.00700 0.00004 bnw_pua7: 0.00317 0.00018 bnw_pua8: 0.00327 0.00004 bnw_pub1: 0.00884 0.00003 bnw_pub2: 0.00890 0.00005 bnw_pub3: 0.00819 0.00003 bnw_pub4: 0.00618 0.00002 bnw_pub5: 0.00555 0.00003 bnw_puc1: 0.00624 0.00003 bnw_puc2: 0.00789 0.00003 bnw_puc3: 0.00771 0.00003 bnw_puc4: 0.00722 0.00002 bnw_puc5: 0.00536 0.00002 bnw_puc6: 0.00440 0.00001 bnw_pud1: 0.00848 0.00005 bnw_pud2: 0.00947 0.00003 bnw_pud3: 0.01079 0.00003 bnw_pud4: 0.00876 0.00005 bnw_pud5: 0.00414 0.00002 |
|
Pu isotopic composition (w %) | bnw_pua | Pu238:
0.0 Pu239: 91.62 Pu240: 7.65 Pu241: 0.70 Pu242: 0.03 |
bnw_pub
|
Pu238:
0.0
Pu239: 81.11 Pu240: 16.54 Pu241: 2.15 Pu242: 0.20 |
|
bnw_puc
|
Pu238:
0.0
Pu239: 71.76 Pu240: 23.50 Pu241: 4.08 Pu242: 0.66 |
|
bnw_pud
|
Pu238:
0.28
Pu239: 75.38 Pu240: 18.10 Pu241: 5.08 Pu242: 1.15 |